A chainsaw uses bar and chain oil designed to cling to the fast-moving chain and bar. This oil resists slinging, unlike motor oil. Use SAE 30 for warm weather, SAE 10 for cold conditions, or biodegradable bar oil for eco-friendly operation. What is chainsaw oil and why it matters Chainsaw oil isn’t just another maintenance…
Get a chainsaw unstuck by turning it off and relieving pressure on the bar. Pry the cut open with wedges or a pry bar, or lift the log to free the chain. If deeply pinched, make a nearby relief cut or remove the bar. Why Chainsaws Get Stuck Understanding why chainsaws get stuck is crucial…
Carve with a chainsaw by starting with soft wood, sketching your design, and making rough cuts first. Use controlled movements, carve with the lower bar, and refine details gradually. Always wear full safety gear and keep the chain sharp for precision. Understand Chainsaw Safety First Chainsaw carving demands serious respect for safety. Unlike standard woodworking,…
NEOTEC chainsaws are made by NEOTEC, a company that develops and sells professional-grade outdoor power equipment. In the United States, NEOTEC products are officially distributed and supported by Precision Tooling US Inc. through NEOTECWORLD.com, serving both commercial professionals and homeowners. Who is Behind Neotec Chainsaws? Digging deeper into the Neotec brand reveals a complex corporate…
Yes, you can put a longer bar on a chainsaw if the engine has enough power to handle it. A longer bar increases engine strain, reduces cutting speed, and affects balance. Most chainsaws safely handle a 2–4 inch increase, while larger jumps require a more powerful saw. Understanding Chainsaw Bar Length The chainsaw bar, essentially…
Craftsman chainsaws are made in multiple countries depending on the model and production year. Manufacturing has occurred in the United States, Mexico, and China under licensed partners. Today, the brand is owned by Stanley Black & Decker, with newer electric models often produced through Black+Decker and gas models historically made by companies such as MTD,…
Yes, most gasoline-powered chainsaws use mixed gas made from unleaded gasoline and 2-stroke engine oil. The standard mix ratio for modern chainsaws is 50:1, though some older models use 40:1 or 32:1. This fuel mixture lubricates the two-stroke engine, and using straight gas or the wrong ratio can cause severe engine damage or seizure. What…
Put a chain back on a chainsaw by loosening the side panel nuts and the chain tensioning screw, then removing the cover. Place the chain onto the drive sprocket and into the bar groove with cutting teeth facing forward on top. Reinstall the cover, hand-tighten the nuts, and adjust tension until the chain fits snugly…
The serial number on a STIHL chainsaw is stamped on the engine housing (crankcase), usually near the muffler. It may appear on a flat surface on either side, under the chain brake or sprocket cover, or on a sticker or metal tag. The number is typically a 9-digit code and may require cleaning dirt or…