Winterize a chainsaw by draining the fuel tank and running the engine dry on gas models. Clean the bar, chain, and air filter, sharpen the chain, and lubricate metal parts to prevent rust. Add a […]
Maintenance
8 posts
Store a chainsaw after use by cleaning the bar, chain, and air intake, then checking chain tension and lubrication. For gas chainsaws, drain fuel or add fuel stabilizer for storage over 30 days. For battery […]
Adjust a chainsaw carburetor by warming the engine for 3–5 minutes, then setting the Low (L) and High (H) screws. Turn screws clockwise to lean and counter-clockwise to richen the fuel mix. Start from a […]
Sharpen a chainsaw blade with a file by placing a round file in the cutter notch and holding it at a 30-degree angle. Keep about 20% of the file above the cutter. File from the […]
Clean a chainsaw chain by removing it and soaking it in a degreaser or warm soapy water for 10–30 minutes. Scrub with a wire brush, rinse thoroughly, dry completely, and relubricate with bar oil. Wear […]
Clean a chainsaw air filter by removing the cover, tapping out loose debris, and washing the filter with warm soapy water. Rinse thoroughly, air-dry completely, and reinstall. Use compressed air gently from the inside out […]
Use a chainsaw file guide by matching the file size and guide angle, typically 30°, to your chain. Align the guide with the cutter angle and direction arrow, file forward with even strokes, lift on […]
Clean a STIHL chainsaw by removing the bar and chain, then brushing or blowing out sawdust from the sprocket area, bar groove, cooling fins, and air filter. Remove burrs, clean with resin solvent if needed, […]